| Twinhan Starbox DVB-S |
Do, 07 Dezember 2006 18:59  |
|
 Cucuy |
 |
|
Beiträge:333
Registriert:Februar 2005 |
|
|
Ich habe eine Twinhan Starbox I (7021) USB1.1/2.0.
Unter Windows läuft das Ding, bis auf kleine Aussetzer.
Die Firmware bekomm ich von hier:
http://www.linuxtv.org/downloads/firmware/ --> dvb-usb-vp702x-01.fw
linuxtv-dvb-apps-1.1.1.tar.gz von derselben Seite lässt sich auf meinem System nicht installieren.
Habe mir also von irgendwo her ein fertiges tgz installiert.
Die erforderlichen Programme scheinen auch alle installiert zu werden.
Wenn ich jetzt aber nach Sendern suchen will, friert mir entweder das ganze System ein, sodass ich mit einem Hardreset neustarten muss,
oder es wird gescannt, aber mit so einer Meldung abgebrochen:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
dumping lists (0 services)
Done.
die andere Variante, die noch auftritt löscht mir das Device /dev/dvb
dmesg gibt mir darauf folgendes aus:
vp702x: usb in operation failed.
usb 5-7.1: USB disconnect, address 9
vp702x: usb out operation failed.
dvb-usb: TwinhanDTV StarBox DVB-S USB2.0 (VP7021) successfully deinitialized and
disconnected.
BUG: unable to handle kernel paging request at virtual address f8e72178
printing eip:
f95a5a9c
*pde = 0197b067
Oops: 0000 [#1]
Modules linked in: arc4 ieee80211_crypt_wep nls_iso8859_1 nls_cp437 vfat fat dvb
_usb_vp702x dvb_usb dvb_core dvb_pll fglrx snd_seq_dummy snd_seq_oss snd_seq_mid
i_event snd_seq snd_pcm_oss snd_mixer_oss appletalk ipv6 sg pcmcia yenta_socket
rsrc_nonstatic pcmcia_core capability commoncap lp parport_pc parport pcspkr psm
ouse pl2303 usblp asix usbnet mii usbserial joydev evdev amd64_agp agpgart snd_v
ia82xx serio_raw gameport ehci_hcd uhci_hcd snd_ac97_codec snd_ac97_bus snd_pcm
snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd bcm43xx
ohci1394 i2c_viapro firmware_class shpchp ieee1394 ieee80211softmac soundcore r8
169 i2c_core ieee80211 ieee80211_crypt
CPU: 0
EIP: 0060:[<f95a5a9c>] Tainted: P VLI
EFLAGS: 00010246 (2.6.17.13 #1)
EIP is at dvb_demux_poll+0x2c/0x60 [dvb_core]
eax: f8e72194 ebx: f8e72130 ecx: 00000000 edx: ffffffea
esi: ed8c7e00 edi: 00000000 ebp: 00000000 esp: eda13bcc
ds: 007b es: 007b ss: 0068
Process scan (pid: 3300, threadinfo=eda12000 task=f20d75b0)
Stack: 00000145 eda13c58 ed8c7e00 c016460c ed8c7e00 00000000 00000000 eda13c50
eda13c10 eda13fb0 eda13c14 c016468f 00000003 eda13c58 eda13c10 eda13c14
eda12000 00000000 00000000 00000003 eda13c50 eda13fb0 08051a60 c0164939
Call Trace:
<c016460c> do_pollfd+0x8c/0xa0 <c016468f> do_poll+0x6f/0x140
<c0164939> do_sys_poll+0x1d9/0x240 <c026d7d8> usb_internal_control_msg+0x58/0x
70
<c026d86e> usb_control_msg+0x7e/0x90 <f8f1606d> vp702x_usb_in_op+0x6d/0xb0 [dv
b_usb_vp702x]
<f8f16195> vp702x_usb_inout_op+0x65/0x80 [dvb_usb_vp702x] <f8f161a1> vp702x_us
b_inout_op+0x71/0x80 [dvb_usb_vp702x]
<c01638c0> __pollwait+0x0/0x60 <c0115230> default_wake_function+0x0/0x20
<c0115230> default_wake_function+0x0/0x20 <c0115230> default_wake_function+0x0
/0x20
<f8f1629a> vp702x_pid_filter+0x4a/0x80 [dvb_usb_vp702x] <f8eda5b8> dvb_usb_ctr
l_feed+0x128/0x140 [dvb_usb]
<f8eda5dc> dvb_usb_start_feed+0xc/0x10 [dvb_usb] <f95a4c70> dvb_dmxdev_filter_
timer+0x10/0x80 [dvb_core]
<f95a52da> dvb_dmxdev_filter_start+0x29a/0x370 [dvb_core] <f95a5957> dvb_demux
_do_ioctl+0x177/0x260 [dvb_core]
<f95a584d> dvb_demux_do_ioctl+0x6d/0x260 [dvb_core] <f95a4626> dvb_usercopy+0x
66/0x120 [dvb_core]
<c01347a3> find_get_page+0x13/0x30 <c013574d> filemap_nopage+0x1cd/0x350
<c0135855> filemap_nopage+0x2d5/0x350 <c0141b1c> do_no_page+0x13c/0x260
<c0141e5d> __handle_mm_fault+0x19d/0x1c0 <c011344b> do_page_fault+0x1ab/0x630
<c01649d8> sys_poll+0x38/0x70 <c0102de7> syscall_call+0x7/0xb
Code: 56 53 8b 74 24 10 8b 5e 74 31 ff 85 db 8b 4c 24 14 ba ea ff ff ff 74 3f 85
c9 8d 43 64 74 0c 85 c0 74 08 51 50 56 ff 11 83 c4 0c <8b> 43 48 83 e8 03 31 d2
83 f8 02 77 1f 8b 73 60 85 f6 74 05 bf
EIP: [<f95a5a9c>] dvb_demux_poll+0x2c/0x60 [dvb_core] SS:ESP 0068:eda13bcc
<1>BUG: unable to handle kernel NULL pointer dereference at virtual address 000
001b0
printing eip:
f95ab884
*pde = 00000000
Oops: 0002 [#2]
Modules linked in: arc4 ieee80211_crypt_wep nls_iso8859_1 nls_cp437 vfat fat dvb
_usb_vp702x dvb_usb dvb_core dvb_pll fglrx snd_seq_dummy snd_seq_oss snd_seq_mid
i_event snd_seq snd_pcm_oss snd_mixer_oss appletalk ipv6 sg pcmcia yenta_socket
rsrc_nonstatic pcmcia_core capability commoncap lp parport_pc parport pcspkr psm
ouse pl2303 usblp asix usbnet mii usbserial joydev evdev amd64_agp agpgart snd_v
ia82xx serio_raw gameport ehci_hcd uhci_hcd snd_ac97_codec snd_ac97_bus snd_pcm
snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd bcm43xx
ohci1394 i2c_viapro firmware_class shpchp ieee1394 ieee80211softmac soundcore r8
169 i2c_core ieee80211 ieee80211_crypt
CPU: 0
EIP: 0060:[<f95ab884>] Tainted: P VLI
EFLAGS: 00010202 (2.6.17.13 #1)
EIP is at dvb_frontend_release+0x24/0x60 [dvb_core]
eax: 0009f9d1 ebx: ed4ec8c0 ecx: 00000000 edx: 00000000
esi: 00000000 edi: f331e454 ebp: f46d0288 esp: eda13a80
ds: 007b es: 007b ss: 0068
Process scan (pid: 3300, threadinfo=eda12000 task=f20d75b0)
Stack: 00000008 ed4ec8c0 c0152244 f331e454 ed4ec8c0 c18d4cc0 ed4ec8c0 c1ba6740
00000000 00000001 c01509a7 ed4ec8c0 c1ba6740 ed4ec8c0 c1ba6740 0000000f
00000003 f0e36dc0 c011a281 ed4ec8c0 c1ba6740 00000020 c1ba6740 f20d75b0
Call Trace:
<c0152244> __fput+0x124/0x160 <c01509a7> filp_close+0x37/0x90
<c011a281> close_files+0x61/0x90 <c011a2e6> put_files_struct+0x16/0x50
<c011ac76> do_exit+0xf6/0x380 <c0103911> die+0x1d1/0x1e0
<f95a5a9c> dvb_demux_poll+0x2c/0x60 [dvb_core] <f95a5a9c> dvb_demux_poll+0x2c/
0x60 [dvb_core]
<c01135f6> do_page_fault+0x356/0x630 <c01148c6> deactivate_task+0x16/0x30
<c01132a0> do_page_fault+0x0/0x630 <c01030bf> error_code+0x4f/0x60
<f95a5a9c> dvb_demux_poll+0x2c/0x60 [dvb_core] <c016460c> do_pollfd+0x8c/0xa0
<c016468f> do_poll+0x6f/0x140 <c0164939> do_sys_poll+0x1d9/0x240
<c026d7d8> usb_internal_control_msg+0x58/0x70 <c026d86e> usb_control_msg+0x7e/
0x90
<f8f1606d> vp702x_usb_in_op+0x6d/0xb0 [dvb_usb_vp702x] <f8f16195> vp702x_usb_i
nout_op+0x65/0x80 [dvb_usb_vp702x]
<f8f161a1> vp702x_usb_inout_op+0x71/0x80 [dvb_usb_vp702x] <c01638c0> __pollwai
t+0x0/0x60
<c0115230> default_wake_function+0x0/0x20 <c0115230> default_wake_function+0x0
/0x20
<c0115230> default_wake_function+0x0/0x20 <f8f1629a> vp702x_pid_filter+0x4a/0x
80 [dvb_usb_vp702x]
<f8eda5b8> dvb_usb_ctrl_feed+0x128/0x140 [dvb_usb] <f8eda5dc> dvb_usb_start_fe
ed+0xc/0x10 [dvb_usb]
<f95a4c70> dvb_dmxdev_filter_timer+0x10/0x80 [dvb_core] <f95a52da> dvb_dmxdev_
filter_start+0x29a/0x370 [dvb_core]
<f95a5957> dvb_demux_do_ioctl+0x177/0x260 [dvb_core] <f95a584d> dvb_demux_do_i
octl+0x6d/0x260 [dvb_core]
<f95a4626> dvb_usercopy+0x66/0x120 [dvb_core] <c01347a3> find_get_page+0x13/0x
30
<c013574d> filemap_nopage+0x1cd/0x350 <c0135855> filemap_nopage+0x2d5/0x350
<c0141b1c> do_no_page+0x13c/0x260 <c0141e5d> __handle_mm_fault+0x19d/0x1c0
<c011344b> do_page_fault+0x1ab/0x630 <c01649d8> sys_poll+0x38/0x70
<c0102de7> syscall_call+0x7/0xb
Code: 8d bc 27 00 00 00 00 56 53 8b 5c 24 10 8b 43 74 8b 0d 10 4c 5b f9 8b 40 28
85 c9 8b 70 0c 75 27 f6 43 18 03 74 0b a1 f8 32 39 c0 <89> 86 b0 01 00 00 53 8b
5c 24 10 53 e8 3b 89 ff ff 5a 59 5b 5e
EIP: [<f95ab884>] dvb_frontend_release+0x24/0x60 [dvb_core] SS:ESP 0068:eda13a80
<1>Fixing recursive fault but reboot is needed!
usb 5-7.1: new high speed USB device using ehci_hcd and address 10
usb 5-7.1: device descriptor read/64, error -110
usb 5-7.1: device descriptor read/64, error -110
usb 5-7.1: new high speed USB device using ehci_hcd and address 11
usb 5-7.1: device descriptor read/64, error -110
usb 5-7.1: device descriptor read/64, error -110
usb 5-7.1: new high speed USB device using ehci_hcd and address 12
usb 5-7.1: device descriptor read/8, error -110
usb 5-7.1: device descriptor read/8, error -110
usb 5-7.1: new high speed USB device using ehci_hcd and address 13
usb 5-7.1: device descriptor read/8, error -110
usb 5-7.1: device descriptor read/8, error -110
Habe keine Idee mehr, was ich noch machen kann.
eine andere channels.conf zu verwenden lief bisher auch immer schief
(bin auch über Antworten über ICQ dankbar)
[Aktualisiert am: Fr, 09 Februar 2007 19:21]
Slackware Current
"Räum dein Zimmer auf, oder ich nehm dir die Root Rechte""Den Beitrag einem Moderator melden
|
|
|
|
|
|
Mitglieder
Suche
Hilfe
Registrieren
Anmelden
Startseite
